• Español
  • English
  • Português

2.5 and 3 axis milling

Sprutcam para programação avançada

SprutCAM is CAD/CAM software with a streamlined workflow and comprehensive functionality. Compatible with any CNC machine: 3/4 and 5 axis milling machine, Lathe, Turning center, Swiss Lathe, Multitasking, EDM. The tool path calculation is performed taking into account the complete machine kinematics and limitations, including collision avoidance and control of axis limits.

2.5 and 3 axis milling

Production of parts, molds and dies and any other parts on a 3-axis milling machine.

sprutcam 14

The new 2.5D contour operation

A new 2.5D contour operation has been added, organized on the same principle as the well-known 2D contour operation. Its main difference is that in one operation you can machine several curves or vertical walls located at different heights at the same time.

Collision control during toolpath calculation

SprutCAM takes the actual kinematic limitations of the machine into account for the initial toolpath calculation. There is no need for post-processing and separate simulation for collision control and axis limits.

Machining time savings

Remachining removes material that a previous tool or operation could not remove. In SprutCAM, areas with remaining material are automatically detected.

Set of 3-axis trajectories

A new 2.5D contour operation has been added, organized on the same principle as the well-known 2D contour operation. Its main difference is that in one operation you can machine several curves or vertical walls located at different heights at the same time.

Sketch based machining

Design a part in the included 2D CAD and use it directly for machining.

CONTACT COMACBR